Image 1 of 1
All threads are purely cosmetic. When it comes to metric fasteners, each type follows standard sizing conventions. For instance, M6 bolts come in various lengths, such as 6mm, 8mm, and more. This comprehensive collection in the SolidWorks library includes fasteners, sheet-metal inserts, bearings, structural profiles, and hole sizes, all in standard metric dimensions.
NUTS ’N BOLTS – FASTENERS
Bolts & Screws
(sizes: M1.6 – M36 depending on type)
Socket Head Cap Screw (SHCS) – M3–M36
Countersunk Head Cap Screw (CSCS) – M3–M24
Button Head Socket Screw (BHSS) – M3–M20
Socket Head Shoulder Screw (SHSS) – M5–M20
Socket Low Head Cap Screw (SLHCS) – M3–M20
Grub Screw Plain Cup (GSC) – M3–M24
Grub Screw Knurled Cup (GSK) – M3–M24
Hex Bolt (HB) – M5–M36
Hex Bolt Flange Head (HBF) – M5–M16
Hex Head Set Screw (HHSS) – M3–M30
Machine Screw Phillips Pan (MSPP) – M2–M10
Machine Screw Phillips CSK (MSPC) – M2–M10
Self-tap Phillips Pan AB (SPP-AB) – #4–#14
Self-tap Phillips CSK AB (SPC-AB) – #4–#14
Nuts
(M2 – M36)
Anchor-Sert (AS) – M3–M12
Hex Nut Plain (HNP) – M2–M36
Lock Nut (LN) – M3–M24
Nyloc Nut (NN) – M3–M24
Nyloc Nut Thin (NNT) – M3–M20
Slotted Nut (SN) – M6–M36
Castle Nut (CN) – M6–M36
Dome Nut (DN) – M4–M20
Wing Nut (WN) – M4–M12
Flange Nut (FN) – M5–M16
Pressed Nut Square (PS) – M3–M8
Pressed Nut Hexagonal (PH) – M3–M8
Connecting Nut (CNN) – M6–M16
Washers
(Sizes correspond to screw sizes M2–M36)
Plain Washer (PW)
Spring-Lock Washer (SLW)
Internal Lock Washer (ILW)
External Lock Washer (ELW)
Structural Washer Hard Tempered (SW-HT) – M12–M36
Structural Tapered Washer 8° (SW-ST) – M12–M36
Coronet Load Indicator (SW-LI) – M20–M36
Pins
Spring Pin (SP) – Ø1.5–Ø20
Dowel Pin (DP) – Ø3–Ø20
Clevis Pin (CLV) – Ø3–Ø20
Cotter Pin (COT) – Ø1–Ø6
Clips
E-Clip (EC) – Ø1.2–Ø25
Internal Circlip (ICC) – Ø8–Ø300
External Circlip (ECC) – Ø3–Ø300
Push-On Fixing (POF) – M3–M8 shafts
Blind Rivets
Standard (BR) – Ø2.4–Ø6.4
Large Flange (BR-LF) – Ø3.2–Ø6.4
CSK 120° (BR-CSK-120deg) – Ø3.2–Ø4.8
SHEETMETAL FASTENERS
(sizes M2–M10 depending on type)
Nutsert (PS) – M3–M10
Flush Nutsert (PF) – M3–M6
Studsert (PFH) – M3–M8
Blind Standoff (PBSO) – M3–M6
Through-Hole Standoff (PTSO) – M3–M6
Thread-Locking Nutsert (MINILOK) – M3–M5
Tri-Lobe Blind Nut (TR) – M3–M10
Anchor-Sert (AS) – M4–M12
ARB Series – M3–M12
ARB Tank-Type – M4–M12
MINIARB – M2–M4
ARBSO – M3–M6
MINIOFF – M2–M4
EUROSERT ANCHOR BUSHES
9408 Series – M3–M8
39002 Series – M3–M10
39006 Series – M3–M10
PSM DIRECT SCREW FIXINGS (TMA/TMP/TMS)
(M2–M6)
Countersunk (6-lobe, Phillips, Pozi)
Pan Head (6-lobe, Phillips, Pozi)
Pan Flange (TMP only)
PSM INSERTS FOR PLASTICS
Screwsert (SCT) – M2–M10
Headed Screwsert (SCTH) – M2–M10
Screwsert Stud (SCTS) – M3–M8
Sonic-Lok (SL) – M2–M8
Headed Sonic-Lok (SHK) – M2–M8
Sonic-Lok Stud (SLTS) – M3–M8
BEARINGS (Ball, Roller, Linear)
Ball Bearings
Miniature: Ø2–Ø12
Single Row: Ø10–Ø120
Double Row: Ø15–Ø150
Angular Contact: Ø10–Ø120
Thrust Ball: Ø6–Ø150
Roller Bearings
Crossed Roller: Ø20–Ø200
Cylindrical Roller: Ø12–Ø300
Spherical Roller: Ø25–Ø400
Tapered Roller: Ø15–Ø300
Linear Bearings
Compact/Light/Heavy: Ø8–Ø80 shaft sizes
MISCELLANEOUS
Keys
Parallel/Taper/Woodruff – Width 2–32 mm, Length 10–160 mm
Rod Ends
Male/Female – M5–M30
Sealing Rings
Shaft sizes Ø6–Ø200
Plain Bearings
Radial spherical – Ø6–Ø200
Spherical Bushings
SB Series – Ø5–Ø30
STRUCTURAL SECTIONS – CHANNELS & BEAMS
(Typical Australian standard sizes)
Cold-Formed
CA Angles – 25×25×2 to 200×200×6
CC Channels – 75×35×2 to 300×50×3
CHS – Ø20×2 to Ø200×6
RHS – 20×20×1.6 to 200×100×6
SHS – 20×20×1.6 to 200×200×9
Hot-Rolled
EA Angles – 20×20×3 to 200×200×26
PFC – 75×40×5 to 380×100×13
UB – 150×14 to 610×125
UC – 100×100×10 to 310×300×15
UBP – Rare sizes depending on supplier
TAP ’N CLEAR – HOLE SIZES
Tapped Holes (Blind/Through): M1.6–M36
Clearance Holes: M2–M36
Countersinks & Counterbores: matched to bolt sizes M2–M36
This Library is compactable with solidworks 2022 and onwards. If you have any questions feel free to contact us.